NORDIC FORM OIL VG 10
Product code: 6363
NORDIC FORM OIL VG 10 is a high quality mineral moulding oil and is recommended for steel- and coated moulds and to be applied by spraying, swabbing or brushing and can also be used for the manufacturing of concrete in heated moulds
NORDIC FORM OIL VG 10 is based on high quality mineral virgin base oil in combination with a special additive to ensure the following properties.
Ensure Properties
Good release characteristics.
No discoloring of the concrete surface.
Good protection against deposits.
High protection against rust in steel moulds at normal conditions.
Preventing against put-forming in the concrete surface.
No problems can be expected afterwards with tiles, wallpaper etc.
Solvent Free, odourless.
Package set: CAN 20L
Note: Registered users have more options
NORDIC FORM OIL VG 10
exceeds the following performance criteria:
| Properties | Unit | Method | Typical Value |
|---|---|---|---|
| ISO VG Grade | 10 | ||
| Density @15В°C | kg/m3 | ASTM D4052 | 850 |
| Kinematic Viscosity @ 40В°C | mm2/s | ASTM D7042 | 10 |
| Flash Point COC | В°C | ASTM D92 | >201 |
| Pour Point | В°C | ASTM D7346 | -15 |
| Total Base Number | mgKOH/g | ASTM D2896 | 1 |
| Exceeds |
|---|
| ISO 19378 GA & GB |
| General Motors LS2 |
| ISO 11158 HG |
| DIN 51524 part II |
| DIN 51517 part III |
| FZG 12 |
| AIST 224 |
| AGMA 9005 E02 (EP) |