NORDIC BIO FORM MT 245

Product code: 6388

NORDIC BIO FORM MT 245 is a protective agent for mixers and machinery for use in the concrete and asphalt industries. NORDIC BIO FORM MT 245 protects concrete mixers, concrete and mortar pumps, truck dump-beds, concrete buckets, road pavers, construction equipment and machinery from the adhesion of mortar and concrete. In asphalt processing, NORDIC BIO FORM MT 245 is used as a maintenance/care product and as cleaner to enhance sliding properties for dump beds, road pavers and work equipment. NORDIC BIO FORM MT 245 is a ready-to-use product and should be applied using a pressure or power sprayer; application should be repeated after every wet-cleaning cycle. Can be spray-applied onto wet surfaces immediately after cleaning once water splashes have drained off, or after drying. Not suitable for use as longterm storage protection. If exposed to strong direct sunlight, encrustation may occur, which can be removed with a suitable cleaner.

NORDIC BIO FORM MT 245 protective agent is based on renewable raw materials and therefore readily biodegradable. NORDIC BIO FORM MT 245 can be stored in its original, unopened container for a minimum of 18 months and should be kept away from frost and direct sunlight. Observe the statutory provisions on the storing, bottling and handling of water-polluting substances. The NORDIC BIO FORM MT 245 protective agent is based on renewable raw materials and therefore readily biodegradable.

• For use immediately after wet cleaning

• Normally, no increase of air content in the concrete

• No swelling with most sorts of rubber

• Easy spray application

• Good corrosion protection